Husqvarna SMR 450-510/2008-I.E., Owner'S Manual, Page: 180 / 530

OVERHAULING THE WHEELS
The tables hereunder show the type of control the rim and
wheel axle are to be submitted to.
Note*: if the rim is badly, it should be re-
placed.
DEFORMATION RIM
WHEEL RIM AXLE BENDING
If the bending figure is over the allowable max. limit, straight-
en or replace the axle.
If the wheel axle cannot be straightened within the max. limits
(0,2 mm - 0,008 in.) stated, replace it.
WHEEL SPOKES
Check to make sure that all the nipples are tight; tighten them
if necessary.
Remember that an insufficient stretch jeopardizes the motorcy-
cle stability.
For an instant check, use a metal point (for instance, a screw-
driver) to beat the spokes with. A live sound accounts for an ac-
curate tightening, while a dull sound means that a new tight-
ening is necessary.
78
STANDARD MAX.LIMIT
Side skid
less than 0,5 mm
(0.02 in)
2 mm
(0,078 in)
Eccentricity
less than 0,8 mm
(0.03 in)
Cap11a_GB 9-07-2007 16:33 Pagina 78