Husqvarna PP440HF, Workshop Manual, Page: 71 / 165

9
71
REMOTE CONTROL
RC Service Menu
1� To get into the service menu, take
the number shown in the display
and multiply it by itself� The
last 5 digits of the product is the
password�
Example: 49910 x 49910 =
2491008100, where 08100 would
be the password�
2� Make sure the reading is 0% when
the potentiometer is turned fully
counter clockwise and 100% when
it is turned fully clockwise� When
the feed motor potentiometers
are pointing straight up the
readings should be 50%� If the
readings differ from 50% and
100% go to calibrate� If 0% can’t
be achieved, even by mechanically
repositioning the potentiometer
then, the potentiometer has to be
replaced�
3� Put the potentiometer in the
position you want it to show 50%
(i�e� straight up) and push OK�
4� Put the potentiometer in the
position you want it to show
100% (i�e� fully clock wise) and
push OK�
9. REMOTE CONTROL