Problem
Cause
Solution
The product makes
an irregular scratch
pattern.
The diamond tools are incorrectly attached or
attached at different heights on the grinding
discs.
Make sure that all diamond tools are installed
correctly and have the same height.
The diamond tools are of mixed types.
Make sure that all segments are the same di-
amond grit and bond. If the diamond seg-
ments are rough, space out the rough dia-
mond segments equally. Operate the product
on an abrasive surface until all segments
have the same height.
The head locks are loose or missing.
Make sure that all head locks are in position
and tightened.
The resin tools are mixed or have unwanted
contamination.
Make sure that all resins are the same dia-
mond grit and bond and that there is no con-
tamination. To clean the resin tools, operate
them for a short time on a lightly abrasive
surface.
The grinding discs are worn or damaged.
Do a check on the grinding discs for broken
sections or too much movement.
There are sudden un-
wanted movements
in the product.
The grinding discs are worn or damaged.
Examine the grinding discs for damaged
parts and too much movement.
The diamond tools are incorrectly attached or
attached at different heights on the grinding
discs.
Make sure that all diamond tools are installed
correctly and that all have the same height.
The head locks are loose or missing.
Make sure that all head locks are in position
and tightened.
The internal circuit
breaker releases.
Too high a load or not sufficient power sup-
ply.
Do a check of the power supply.
Decrease the grinding pressure, increase the
number of diamond tools or increase the
bond hardness.
Transportation, storage and disposal
Transportation
WARNING: Be careful during transportation.
The product is heavy and can cause injury
or damage if it falls or moves during
transportation.
The wheels let you move the product shorter distances.
For longer distances, lift the product to move it or put the
product on a vehicle.
CAUTION: Do not tow the product behind a
vehicle.
• Be very careful when you move the product
manually or on surfaces with a slope. Small slopes
can result in a fast movement that is not possible to
brake by hand.
• Safety the product during transportation. Make sure
that it cannot move.
• Put some type of protection on the product during
transportation. The protection keeps natural
elements such as rain and snow away from the
product.
• Always use the lifting eye on the product when you
lift the product.
• Do not lift the product by the handlebar, motor,
chassis or other parts.
• Transportation is best done on a pallet.
• Always lift the product with a lift or forklift.
• Do not use a forklift if the product is not put on a
pallet or carriage. This can cause damage to the
grinding discs and other internal components.
1253 - 003 - 22.01.2020
21
Summary of Contents for PG 830S
Page 110: ...110 1253 003 22 01 2020 ...
Page 111: ...1253 003 22 01 2020 111 ...
