Husqvarna Norden 901 2022, Owner'S Manual

Page: 96 / 170

13 SERVICE WORK ON THE CHASSIS
94
13.28 Cleaning the dust boots of the fork legs
Preparatory work
–
Raise the motorcycle with the rear lifting gear. ( p. 79)
–
Lift the motorcycle with the front lifting gear. ( p. 79)
V02391-10
Main work
–
Push dust boots
1
of both fork legs downward.
Info
The dust boots remove dust and coarse dirt parti-
cles from the inside fork tubes. Over time, dirt can
accumulate behind the dust boots. If this dirt is not
removed, the oil seals behind can start to leak.
Warning
Danger of accidents
Oil or grease on the brake
discs reduces the braking effect.
–
Always keep the brake discs free of oil and
grease.
–
Clean the brake discs with brake cleaner when
necessary.
–
Clean and oil the dust boots and inside fork tubes of both
fork legs.
Universal oil spray ( p. 159)
–
Press the dust boots back into the installation position.
–
Remove the excess oil.
Finishing work
–
Take the motorcycle off the front lifting gear. ( p. 80)
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 79)
13.29 Removing the windshield
V02383-10
–
Remove screws
1
and take off windshield
2
.