ERGONOMICS 8
57
F01907-10
–
Remove screws
1
. Take off the handlebar clamps
2
.
Position the handlebar so that screws
3
are accessible.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.
–
Remove screws
3
. Take off handlebar supports
4
.
–
Move the handlebar supports into the desired
position
B
,
A
or
C
. Mount and tighten screws
3
.
Guideline
Mount the left and right handlebar supports in the same
position.
Screw, handle-
bar support
M10
45 Nm (33.2 lbf ft)
Loctite
®
243™
–
Position the handlebar.
Info
Make sure the cables and wiring are positioned cor-
rectly.
–
Position handlebar clamp. Mount screws
1
and tighten
evenly.
Guideline
Screw, handlebar
clamp
M8
20 Nm (14.8 lbf ft)
8.4
Adjusting the basic position of the clutch lever
V02346-11
–
Push clutch lever forward.
–
Adjust the basic position of the clutch lever to your hand size
by turning adjusting screw
1
.
Info
When the adjusting screw is turned clockwise, the
clutch lever moves closer to the handlebar.
When the adjusting screw is turned counterclockwise,
the clutch lever moves away from the handlebar.
The range of adjustment is limited.
Only turn the adjusting screw by hand, and do not use
force.
Do not make any adjustments while riding.
Summary of Contents for Norden 901 2022
Page 1: ...OWNER S MANUAL 2022 Norden 901 Art no 3402576en ...
Page 2: ......
