Husqvarna Norden 901 2022, Owner'S Manual

Page: 50 / 170

7 COMBINATION INSTRUMENT
48
Not every phone and headset is suitable for pairing with the vehi-
cle.
7.24.25 Phone Pairing (optional)
V02227-01
Condition
• The motorcycle is stationary.
•
Bluetooth
®
function is activated.
• The Bluetooth
®
function should also be activated in the
device to be paired.
–
Press the SET button when the menu is closed.
–
Press the UP or DOWN button until Settings is highlighted.
Press the SET button to open the menu.
–
Press the UP or DOWN button until Ride Husqvarna is high-
lighted. Press the SET button to open the menu.
–
Press the UP or DOWN button until Phone Pairing is high-
lighted. Press the SET button to open the menu.
Info
Only one cellphone can be paired with the vehicle.
–
Press the
UP
or
DOWN
button until
New Pairing
is high-
lighted. Press the
SET
button to open the menu.
–
The vehicle starts searching for a suitable cellphone. If the
search was successful, the name of the cellphone is dis-
played in the
New Pairing
menu. Press the
SET
button to
start the pairing.
Info
The cellphone must be visible via Bluetooth
®
for the
vehicle to find the cellphone.
–
A message appears on the combination instrument indicat-
ing that the vehicle is now ready for pairing. The pairing is
completed successfully by confirming the
Passkey
on the
cellphone and on the combination instrument.
Info
Press the UP or DOWN button until Delete Pairing is
marked. The paired device can be deleted by pressing
the
SET button.
Not every cellphone is suitable for pairing with the
vehicle.
–
Move the previously paired device into the range of the vehi-
cle while the
Bluetooth
®
function is active.
The device is automatically connected with the vehicle.
If the device is not automatically connected with the
vehicle after approx. 30 seconds:
–
Switch on the vehicle again or repeat the
New Pair-
ing
procedure.
A suitable cellphone can be paired with the vehicle in
the
New Pairing
menu.