2. Push and hold the release button.
3. Carefully push the shaft into the coupling
until you hear a click. Make sure that
the release button go into the hole in the
coupling.
4. Tighten the knob fully.
To disassemble the shaft
1. Turn the knob 3 turns or more to loosen
the coupling.
2. Push and hold the release button.
3. Hold tight to the end of the shaft segments
that you are to remove.
4. Pull the shaft straight out of the coupling.
14
1744 - 004 - 22.03.2022
Summary of Contents for MADSAW 525iDEPS
Page 90: ...90 1744 004 22 03 2022 ...
Page 91: ...1744 004 22 03 2022 91 ...
