3. Use your foot to put the transport device between
the rammer shoe and the lift handle on the rammer
leg.
4. Push the handle down to tilt the product rearward.
5. Remove the transport device in the opposite
sequence.
WARNING: Do not use your hands to
install or remove the transport device.
Push it in and pull it away from the
product with your foot.
To lift the product
WARNING: Make sure that the lifting
equipment has the correct specification to lift
the product safely. The type plate on the
product shows the product weight.
• Attach the lifting equipment at the lifting point of the
safety frame. A label on the product identifies the
correct position.
WARNING: Do not lift a damaged product.
Make sure that the safety frame and the
vibration damping units are correctly
installed and not damaged.
WARNING: Do not walk or stay below or
near a lifted product.
To safety the product to a transportation
vehicle with tie-down straps
1. Set the throttle control in the stop position.
2. Tilt the product forward until the wheels on the
handle are on the ground.
3. Attach a strap to the lifting eye and to the vehicle.
957 - 002 - 14.10.2019
15
