Husqvarna FE 450 2018, Owner'S Manual

Page: 59 / 164

12 SERVICE WORK ON THE CHASSIS
57
12.6 Installing the fork protector
V00903-11
–
Position the fork protector on the left fork leg. Mount and
tighten screws
1 .
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
2
.
–
Position the fork protector on the right fork leg. Mount and
tighten screws
3
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
12.7 Removing the fork legs
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 113)
–
Raise the motorcycle with a lift stand. ( p. 55)
–
Remove the front wheel. ( p. 101)
S02105-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove the cable tie(s).
–
Remove screws 2 and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
K00601-10
–
Loosen screws 3 . Take out the left fork leg.
–
Loosen screws
4
. Take out the right fork leg.