Husqvarna FC 350 2023, Owner'S Manual

Page: 18 / 158

6 CONTROLS
16
6.5 Start button
F03650-10
Start button
1
is fitted on the right side of the handlebar.
Possible states
• The start button is in the basic position
• The start button is pressed
–
In this position, the starter
motor is actuated.
6.6 Combination switch
F03761-10
The combination switch is fitted on the left side of the handlebar.
Possible states
1 STANDARD
–
STANDARD mapping is activated
when the indicator lamp
A
lights up.
1 TC STANDARD with TC
–
STANDARD mapping with
traction control is activated when the indicator
lamp
A
and the TC indicator lamp light up.
2 ADVANCED
–
ADVANCED mapping is activated
when the indicator lamp
B
lights up.
2 TC
ADVANCED with TC
–
ADVANCED mapping with
traction control is activated when the indicator
lamp
B
and the TC indicator lamp light up.
The engine characteristic can be changed using button
1
and
button
2
on the combination switch.
Traction control can be activated using the TC button
3
on the
combination switch.
Launch control and the quickshifter can also be activated using
the combination switch.
6.7 Overview of indicator lights (All FC models)
A01223-11
Possible states
Malfunction indicator lamp lights up/flashes orange
–
The OBD has detected a malfunction in the vehi-
cle electronics. The malfunction indicator lamp also
lights up if traction control is activated and the speed
limiter intervenes.
TC indicator lamp lights up orange
–
TC is enabled
or is currently intervening. The TC indicator lamp
flashes if launch control is activated.
QS indicator lamp lights up blue
–
The quickshifter
is activated. The QS indicator lamp flashes when the
quickshifter is being programmed.
Indicator lamp
A
lights up white
–
STANDARD mapping is activated.
Indicator lamp
B
lights up green
–
ADVANCED mapping is activated.