Husqvarna FC 250 2017, Owner'S Manual, Page: 47 / 114

11 SERVICE WORK ON THE CHASSIS
45
F00089-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting

.
Guideline
Nut, linkage lever to angle lever M14x1.5 80 Nm (59 lbf ft)
Info
Pay attention to flat area  .
–
Mount and tighten screw  .
Guideline
Screw, bottom shock
absorber
M10 60 Nm
(44.3 lbf ft)
Loctite ® 2701™
Info
Raise the wheel slightly to be able to mount the screw more easily.
F00074-11
–
Position the frame protector on the left and right.
–
Mount and tighten screws

.
Guideline
Screw, frame protector M5 3 Nm (2.2 lbf ft)
–
Mount and tighten screws

with the washers.
Guideline
Screw, frame protector M5 3 Nm (2.2 lbf ft)
–
Mount the new cable ties.
Finishing work
–
Check the free travel of the foot brake lever. ( p. 64)
–
Remove the motorcycle from the lift stand. ( p. 35)
11.20 Removing the seat
Preparatory work
–
Remove the air filter box cover. ( p. 46)
H01401-10
Main work
–
Remove screw

.
–
Pull seat back and lift it off.