Husqvarna F2303V7, Owner'S Manual, Page: 61 / 170

SERVICE WORK ON THE CHASSIS 12
59
12.7 Removing the fork protector
H03681-10
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
and take off the left fork protector.
–
Remove screws
3
and take off the right fork protector.
12.8 Installing the fork protector
H03681-11
–
Position the fork protector on the left fork leg. Mount and
tighten screws
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
2
.
–
Position the fork protector on the right fork leg. Mount and
tighten screws
3
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
12.9 Removing the lower triple clamp
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 112)
–
Raise the motorcycle with a lift stand. ( p. 56)
–
Remove the front wheel. ( p. 98)
–
Remove the fork legs. ( p. 57)
–
Remove front fender. ( p. 63)
H03682-10
Main work
–
Remove screw
1
.
–
Remove screw
2
.
–
Open cable holder
3
in front of the left radiator and detach
the clutch line.
–
Take off the upper triple clamp with the handlebar and set
aside.
Info
Cover the components to protect them against dam-
age.
Do not kink the cables and lines.