Husqvarna F2303V7, Owner'S Manual

Page: 65 / 170

SERVICE WORK ON THE CHASSIS 12
63
12.12 Adjusting steering head bearing play
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 56)
H03689-10
Main work
–
Loosen screws
1
. Remove screw
2
.
–
Loosen and retighten screw
3
.
Guideline
Screw, top steering
head M20x1.5 12 Nm (8.9 lbf ft)
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.
–
Tighten screws
1
.
Guideline
Screw, top triple
clamp M8 17 Nm (12.5 lbf ft)
–
Mount and tighten screw
2
.
Guideline
Screw, top
steering stem M8 17 Nm (12.5 lbf ft)
Loctite ® 243™
Finishing work
–
Check the steering head bearing for play. ( p. 62)
–
Remove the motorcycle from the lift stand. ( p. 56)
12.13 Greasing the steering head bearing
H02387-01
–
Remove the lower triple clamp. ( p. 59)
–
Install the lower triple clamp. ( p. 60)
12.14 Removing front fender
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 112)