Husqvarna F2275U4, Owner'S Manual

Page: 58 / 162

12 SERVICE WORK ON THE CHASSIS
56
12.6 Installing the fork protector
H03681-11
–
Position the fork protector on the left fork leg. Mount and
tighten screws
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line, wiring harness, and clamp. Mount and
tighten screws
2
.
–
Position the fork protector on the right fork leg. Mount and
tighten screws
3
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
12.7 Removing the fork legs
Preparatory work
–
Remove the headlight mask with the headlight. ( p. 112)
–
Raise the motorcycle with a lift stand. ( p. 54)
–
Remove the front wheel. ( p. 100)
H03678-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove the cable tie.
–
Remove screws
2
and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
S03576-11
–
Loosen screws
3
. Remove the left fork leg.
–
Loosen screws
4
. Remove the right fork leg.