Husqvarna F2203V4, Owner'S Manual

Page: 86 / 166

12 SERVICE WORK ON THE CHASSIS
84
12.38 Checking the frame
F00255-01
–
Check the frame for damage, cracking, and deformation.
» If the frame shows signs of damage, cracking, or defor-
mation:
–
Change the frame.
Guideline
Repairs on the frame are not permitted.
12.39 Checking the link fork
401520-01
–
Check the link fork for damage, cracking, and deformation.
» If the link fork exhibits damage, cracking, or deformation:
–
Change the link fork.
Info
Always replace a damaged link fork. Repair of
the link fork is not authorized by Husqvarna
Motorcycles.
12.40 Checking the throttle cable routing
Preparatory work
–
Remove the air filter box cover. ( p. 68)
–
Remove the seat. ( p. 66)
–
Remove the right side cover. ( p. 70)
–
Remove the fuel tank. ( p. 75)
F03501-01
Main work
–
Check the throttle cable routing.
Both throttle cables must be routed, side by side, on the
back of the handlebars and above the fuel tank bracket,
to the throttle valve body. Both throttle cables must be
secured behind the rubber strap of the fuel tank support.
» If the throttle cable is not routed as specified:
–
Correct the throttle cable routing.