Husqvarna F2203V4, Owner'S Manual

Page: 52 / 166

11 TUNING THE CHASSIS
50
11.10 Adjusting the riding sag
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 54)
–
Remove the shock absorber. ( p. 63)
–
After removing the shock absorber, clean it thoroughly.
B00292-10
Main work
–
Choose and mount a suitable spring.
Guideline
Spring rate
Weight of rider: 65 …
75 kg (143 … 165 lb.) 39 N/mm (223 lb/in)
Weight of rider: 75 …
85 kg (165 … 187 lb.) 42 N/mm (240 lb/in)
Weight of rider: 85 …
95 kg (187 … 209 lb.) 45 N/mm (257 lb/in)
Info
The spring rate is shown on the outside of the spring.
Smaller weight differences can be compensated by
changing the spring preload.
Finishing work
–
Install the shock absorber. ( p. 65)
–
Remove the motorcycle from the lift stand. ( p. 54)
–
Check the static sag of the shock absorber. ( p. 48)
–
Check the riding sag of the shock absorber. ( p. 48)
–
Adjust the rebound damping of the shock absorber. ( p. 47)
11.11 Checking the basic setting of the fork
Info
For various reasons, no exact riding sag can be determined for the fork.
401000-01
–
As with the shock absorber, smaller differences in the rider's
weight can be compensated by the spring preload.
–
However, if the fork frequently bottoms out (hard end stop on
compression), harder springs must be fitted to avoid damage
to the fork and frame.
–
If the fork feels unusually hard after extended periods of
operation, the fork legs need to be bled.