Husqvarna F2201U1, Owner'S Manual

Page: 127 / 163

SERVICE WORK ON THE ENGINE 17
125
17.1 Changing the fuel screen
Danger
Fire hazard
Fuel is highly flammable.
The fuel in the fuel tank expands when warm and can escape if overfilled.
–
Do not fuel the vehicle in the vicinity of open flames or lit cigarettes.
–
Switch off the engine for refueling.
–
Make sure that no fuel is spilled; particularly not on hot parts of the vehicle.
–
If any fuel is spilled, wipe it off immediately.
–
Observe the specifications for refueling.
Warning
Danger of poisoning Fuel is poisonous and a health hazard.
–
Avoid skin, eye and clothing contact with fuel.
–
Immediately consult a doctor if you swallow fuel.
–
Do not inhale fuel vapors.
–
In case of skin contact, rinse the affected area with plenty of water.
–
Rinse the eyes thoroughly with water, and consult a doctor in case of fuel contact with the eyes.
–
Change your clothing in case of fuel spills on them.
Note
Environmental hazard Improper handling of fuel is a danger to the environment.
–
Do not allow fuel to enter the groundwater, the soil, or the sewage system.
V01389-10
(FC 350 EU, FC 350 US)
–
Clean quick release coupling
1
thoroughly with com-
pressed air.
Info
Under no circumstances should dirt enter into
the fuel line. Dirt in the fuel line clogs the injection
valve!
–
Disconnect the quick release coupling.
Info
Remaining fuel may flow out of the fuel hose.
–
Pull fuel screen
2
out of the connecting piece.
–
Insert the new fuel screen all the way into the connecting
piece.
–
Spray silicone spray onto a lint-free cleaning cloth and
lightly lubricate the O-ring of the quick-release coupling.
Silicone spray ( p. 152)
–
Join quick release coupling
1
.