Husqvarna F2101U0, Owner'S Manual

Page: 57 / 137

SERVICE WORK ON THE CHASSIS 11
55
11.17 Installing front fender
K01078-10
Main work
–
Position front fender. Mount and tighten screws
1
and
2
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
Finishing work
–
Install the start number plate. ( p. 54)
11.18 Removing the shock absorber
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 45)
S03459-10
Main work
–
Remove the cable ties.
–
Remove screws
1
with the washers.
–
Detach frame protector in area
A
and take off.
K01091-10
–
Remove screw
2
.
–
Remove fitting
3
.
Info
Raise the wheel slightly to be able to remove the
screws more easily.