Husqvarna F2101U0, Owner'S Manual

Page: 49 / 137

SERVICE WORK ON THE CHASSIS 11
47
11.5 Removing the fork protector
F00047-10
–
Remove screws
1
on the left fork leg. Take off the clamp.
–
Remove screws
2
on the left fork leg. Take off the left fork
protector.
–
Remove screws
3
on the right fork leg. Take off the right
fork protector.
11.6 Installing the fork protector
F00047-11
–
Position the fork protector on the left fork leg. Mount and
tighten screws
1
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
–
Position the brake line and clamp. Mount and tighten
screws
2
.
–
Position the fork protector on the right fork leg. Mount and
tighten screws
3
.
Guideline
Remaining screws,
chassis M6 10 Nm (7.4 lbf ft)
11.7 Removing the fork legs
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 45)
–
Remove the front wheel. ( p. 88)
S02315-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
and take off the brake caliper.
–
Allow the brake caliper and brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front
wheel is removed.