Husqvarna F1303V1, Owner'S Manual

Page: 82 / 140

14 WHEELS, TIRES
80
14.3 Removing the rear wheel
Preparatory work
–
Raise the motorcycle with the rear lifting gear. ( p. 52)
E01125-11
Main work
(Option: Wire spoked wheels)
–
Remove screw
1
and pull wheel speed sensor
2
out
of the hole.
–
Remove nut
3
with washer.
–
Take off chain adjuster
4
.
–
Hold the rear wheel and remove wheel spindle
5
with
the washer and chain adjuster
4
.
–
Push the rear wheel forward as far as possible and take
the chain off the rear sprocket.
F02824-11
(Option: Cast wheels)
–
Remove screw
1
and pull wheel speed sensor
2
out
of the hole.
–
Remove nut
3
with washer.
–
Take off chain adjuster
4
.
–
Hold the rear wheel and remove wheel spindle
5
with
the washer and chain adjuster
4
.
–
Push the rear wheel forward as far as possible and take
the chain off the rear sprocket.
Warning
Danger of accidents Damaged brake discs reduce
the braking effect.
–
Always lay the wheel down in such a way that the
brake disc is not damaged.
–
Pull the rear wheel back and take it out of the link fork.
Info
Do not operate the foot brake lever when the rear
wheel is removed.