Husqvarna F1303V1, Owner'S Manual

Page: 27 / 140

COMBINATION INSTRUMENT 7
25
The malfunction indicator lamp lights up yellow
–
The
OBD has detected a malfunction in the vehicle elec-
tronics. Come safely to a halt, and contact an autho-
rized Husqvarna Motorcycles workshop.
The shift warning lights up/flashes red
–
The shift
warning light flashes red when the set shift speed
RPM1 is reached. The shift warning light lights up
red when the set shift speed
RPM2
is reached.
The idle indicator lamp lights up green
–
The trans-
mission is in the neutral position.
The high beam indicator lamp lights up blue
–
The
high beam is switched on.
ABS warning lamp lights up yellow
–
Status or error
messages relating to ABS.
7.5 Shift warning light
F01411-10
The shift warning light
1
is located in the center above the dis-
play.
Info
The shift warning light can be configured in the Trip 1 dis-
play and
Trip 2
display by keeping the
MODE
button
pressed.
The shift warning light is always active during the running-in
phase (up to 1,000 km / 621 mi). The shift warning light can only
be deactivated, and the values for
RPM1
and
RPM2
can only be
adjusted after this. The shift warning light flashes red at
RPM1
and the shift warning light lights up red at RPM2 .
Info
In sixth-gear, the shift warning light is deactivated when
the engine is warm after the first service.
Coolant temperature
≤
35 °C (
≤
95 °F)
ODO < 1,000 km (< 620 mi)
The shift warning
light always lights
up at
6,500 rpm
Coolant temperature > 35 °C (> 95 °F)
ODO > 1,000 km (> 620 mi)
RPM1
shift warning
light
flashes
RPM2 shift warning
light
lights up