Husqvarna F1303V1, Owner'S Manual

Page: 19 / 140

CONTROLS 6
17
6.5.2 Start button
F01355-10
Start button
1
is fitted on the right side of the handlebar.
Possible states
• The start button is in the basic position
• The start button is pressed
–
In this position, the starter
motor is actuated.
6.6 Ignition and steering lock
F01356-01
The ignition and steering lock is located in front of the upper
triple clamp.
Possible states
Ignition off OFF
–
In this position, the ignition circuit
is interrupted, a running engine stops, and a non-
running engine will not start. The ignition key can be
removed.
Ignition on
–
In this position, the ignition circuit is
closed and the engine can be started.
Steering locked
–
In this position, the ignition circuit
is interrupted and the steering locked. The ignition
key can be removed.
6.7 Locking the steering
Note
Danger of damage The parked vehicle can roll away or fall over.
–
Park the vehicle on a firm and level surface.
400732-01
–
Park the vehicle.
–
Turn the handlebar all the way to the left.
–
Insert the ignition key into the ignition and steering lock,
press in, and turn to the left. Remove the ignition key.
Steering is no longer possible.