Husqvarna DC 6000, Operator'S Manual

Page: 89 / 104

4. Remove the hose from the filter container.
5. Open the 3 snap locks on the cyclone container.
6. Lift the lid on the cyclone container.
7. Make sure that the cyclone is not clogged.
8. Remove the cyclone screw.
9. Use compressed air or a brush to clean the cyclone
screw and the cyclone container.
10. Install in the opposite sequence.
To clean the filter
1. Remove the 2 knobs and the handle.
2. Remove the hose from the filter container.
1883 - 001 - 01.06.2022 89