Problema
Causa
Acción
El motor se detiene cuando intenta
retroceder.
El sistema de operación inversa
(ROS) no está activado.
Active el sistema de operación inver-
sa (ROS). Consulte
sistema de funcionamiento en rever-
sa (ROS) en la página 52
.
Transporte, almacenamiento y eliminación de residuos
Transporte
Nota:
Cierre y fije la cubierta al producto durante
el transporte para evitar daños. Conecte la cubierta al
producto con las herramientas correctas (cuerda, cable
y otros).
Cuando mueva el producto, coloque el control de la
rueda libre en la posición de rueda libre para desacoplar
la transmisión. El control de rueda libre se ubica en la
barra de tracción trasera del producto.
1. Levante el accesorio a la posición más alta con el
control de elevación del acoplamiento.
2. Retire el control de la rueda libre, insértelo en
la ranura y suéltelo para que se mantenga en la
posición desacoplada.
3. No mueva el producto a más de dos (2) mph
(3,2 km/h).
4. Para volver a acoplar la transmisión, haga el
procedimiento anterior en el orden inverso.
Seguridad de remolque
• Utilice únicamente equipos de remolque aprobados
por Husqvarna.
• Utilice la barra de remolque para conectar el equipo.
• No remolque equipos más pesados que el peso
máximo permitido.
• Cuando remolque equipos, asegúrese de que no
haya otras personas cerca de la máquina.
• No remolque equipos en pendientes ni en terreno
irregular.
• Opere la máquina a baja velocidad cuando remolque
equipos.
Almacenamiento
Prepare el producto para guardarlo al final de
la temporada, y antes de más de 30 días de
almacenamiento. Si mantiene combustible en el
depósito de combustible durante 30 días o más,
partículas pegajosas pueden obstruir el carburador.
Esto afecta negativamente el funcionamiento del motor.
Para evitar partículas pegajosas durante el
almacenamiento, agregue un estabilizador. Si se utiliza
gasolina de alquilato, no es necesario un estabilizador.
Si se utiliza gasolina estándar, no cambie a gasolina
de alquilato. Esto puede provocar que las piezas de
goma sensibles se endurezcan. Agregue estabilizador
al combustible del depósito o al contenedor usado para
el almacenamiento. Utilice siempre las proporciones de
mezcla indicadas por el fabricante. Haga funcionar el
motor durante un mínimo de 10 minutos después de
agregar el estabilizador hasta que fluya al carburador.
ADVERTENCIA:
No mantenga el
producto con combustible en el depósito en
interiores o en lugares con mala ventilación.
Existe riesgo de incendio si los vapores
de combustible alcanzan llamas abiertas,
chispas o luces piloto, como calderas,
depósitos de agua caliente y secadoras de
ropa.
ADVERTENCIA:
Retire el césped,
las hojas y otros materiales inflamables del
producto para reducir el riesgo de incendio.
Deje que el producto se enfríe antes de
guardarlo.
• Limpie el producto, consulte
en la página 56
. Repare los daños de la pintura para
evitar la corrosión.
74
1931 - 004 - 13.10.2022