Husqvarna 701 Supermoto 2016, Owner'S Manual

Page: 92 / 216

12 SERVICE WORK ON THE CHASSIS
90
–
Remove the motorcycle from the work stand.
12.10 Removing the seat
S00996-10
–
Pull on the loop

while raising the rear of the seat.
–
Pull off the seat sideways at the front ends from the side cover.
–
Pull seat back and lift it off.
12.11 Mounting the seat
S01001-10
–
Stretch the seat at the front ends slightly and position holding tabs

on holders

.
The holding tabs engage in the holder.
–
Press holding tab

into the bushings

.
–
Insert locking pin

into the lock housing

and push down the rear of the seat
until the locking pin engages with an audible click.
–
Check, finally, that the seat is correctly mounted.