9. Connect the intermediate pipe (L) to the joint swivel
(F). Make sure that the knob (I) aligns with the
guide track of the intermediate pipe.
F
L
N
M
I
10. Turn the intermediate pipe (L) fully to lock the joint
swivel (F) and the intermediate pipe.
11. Connect the blow pipe (M) to the intermediate pipe
(L). Make sure that the knob (N) on the
intermediate pipe points up and goes into the guide
track of the blow pipe.
12. Turn the blow pipe fully to lock the intermediate
pipe and the blow pipe.
13. Attach the cable clamp to the flexible tube. Put the
cable of the operation handle in the loop on the
cable clamp.
.
To adjust the harness
Adjust the harness to give the best operation position.
1. Put on the harness of the product.
B
A
2. Tighten the shoulder straps (B) until the harness is
tight against your body.
3. Connect the chest strap to the clip (A).
4. Tighten the chest strap.
To put the product in transportation
mode
1. Turn the blower tube until it points up.
2. Connect the transport clip.
Operation
Introduction
WARNING:
Read and
understand the safety chapter before you
use the product.
To connect the battery to the product
WARNING:
Only use
Husqvarna original batteries in the product.
1. Make sure that the battery is fully charged.
10
1166 - 007 - 30.06.2020
Summary of Contents for 340iBT
Page 49: ...1166 007 30 06 2020 49 ...
Page 50: ...50 1166 007 30 06 2020 ...
Page 51: ...1166 007 30 06 2020 51 ...
