Husqvarna 2014 FC 450 EU, Owner'S Manual

Page: 91 / 99

22 TECHNICAL DATA
89
Static sag 30 mm (1.18 in)
Riding sag 100 mm (3.94 in)
Fitted length 486 mm (19.13 in)
Shock absorber oil Shock absorber oil (SAE 2.5) (50180342S1) ( p. 91)
22.9 Chassis tightening torques
Screw, pressure regulator EJOT PT
®
2.3 Nm (1.7 lbf ft)
–
Spoke nipple, front wheel M4.5 5… 6 Nm (3.7… 4.4 lbf ft)
–
Spoke nipple, rear wheel M4.5 5… 6 Nm (3.7… 4.4 lbf ft)
–
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
–
Screw, intake air temperature sensor M5 2 Nm (1.5 lbf ft)
–
Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft)
–
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
–
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
–
Screw, ball joint of push rod on foot
brake cylinder
M6 10 Nm (7.4 lbf ft) Loctite
®
243™
Screw, chain sliding guard M6 6 Nm (4.4 lbf ft) Loctite
®
243™
Screw, electric starter cable connection M6 4 Nm (3 lbf ft)
–
Screw, front brake disc M6 14 Nm (10.3 lbf ft)
Loctite ® 243™
Screw, rear brake disc M6 14 Nm (10.3 lbf ft) Loctite
®
243™
Screw, throttle grip M6 5 Nm (3.7 lbf ft)
–
Fuel connection on fuel tank M8 10 Nm (7.4 lbf ft)
–
Nut, foot brake lever stop M8 20 Nm (14.8 lbf ft)
–
Nut, rear sprocket screw M8 35 Nm (25.8 lbf ft) Loctite
®
2701™
Nut, rim lock M8 12 Nm (8.9 lbf ft)
–
Remaining nuts, chassis M8 25 Nm (18.4 lbf ft)
–
Remaining screws, chassis M8 25 Nm (18.4 lbf ft)
–
Screw, bottom triple clamp M8 12 Nm (8.9 lbf ft)
–
Screw, chain sliding piece M8 15 Nm (11.1 lbf ft)
–
Screw, engine brace M8 33 Nm (24.3 lbf ft)
–
Screw, fork stub M8 15 Nm (11.1 lbf ft)
–
Screw, front brake caliper M8 25 Nm (18.4 lbf ft) Loctite
®
243™
Screw, handlebar clamp M8 20 Nm (14.8 lbf ft)
–
Screw, manifold M8 15 Nm (11.1 lbf ft)
–
Screw, subframe M8 30 Nm (22.1 lbf ft) Loctite
®
2701™
Screw, top steering stem M8 17 Nm (12.5 lbf ft) Loctite
®
243™
Screw, top triple clamp M8 17 Nm (12.5 lbf ft)
–
Engine carrying screw M10 60 Nm (44.3 lbf ft)
–
Remaining nuts, chassis M10 45 Nm (33.2 lbf ft)
–
Remaining screws, chassis M10 45 Nm (33.2 lbf ft)
–
Screw, bottom shock absorber M10 60 Nm (44.3 lbf ft)
Loctite ® 2701™
Screw, handlebar support M10 40 Nm (29.5 lbf ft) Loctite
®
243™
Screw, top shock absorber M10 60 Nm (44.3 lbf ft) Loctite
®
2701™
Nut, fuel pump M12 15 Nm (11.1 lbf ft)
–
Nut, frame to linkage lever M14x1.5 80 Nm (59 lbf ft)
–
Nut, linkage lever on swingarm M14x1.5 80 Nm (59 lbf ft)
–
Nut, linkage lever to angle lever M14x1.5 80 Nm (59 lbf ft)
–
Nut, swingarm pivot M16x1.5 100 Nm (73.8 lbf ft)
–
Nut, rear wheel spindle M20x1.5 80 Nm (59 lbf ft)
–
Screw, top steering head M20x1.5 12 Nm (8.9 lbf ft)
–
Screw-in nozzles, cooling system M20x1.5 12 Nm (8.9 lbf ft) Loctite
®
243™