4
Procedures
1.
3.
2.
Connecting the Foot Control
Among the accessories you will fi nd the foot
control cord and the main cord.
1.
Remove the foot control cord. Place the
foot control on its narrow side. Fit the
plug into the socket inside the foot con-
trol compartment.
2.
Push it fi rmly to make sure it is properly
connected. This operation is only neces-
sary the very fi rst time you are going to
use the machine.
3.
To correctly turn away the cord, place it
into the slot.
Note:
Before plugging in, check to ensure
that the foot control is of type “FR2”/“FR4”.
Connecting to the Power
Supply
On the underside of the machine you will
fi nd information about the power supply (V)
and the frequency (Hz). Check the power
supply setting in the machine to ensure that
this agrees with the main supply before you
connect the machine.
1.
Connect the foot control cord to the fi rst
socket on the bottom right side of the
machine.
2.
Connect the main cord to the back socket
on the bottom right side of the machine.
3.
When you press the power switch, both
the machine and the light are switched
on.
For the USA and Canada
This Sewing Machine has a polarized
plug (one blade wider than the other). To
reduce the risk of electric shock, this plug
is intended to fi t in a polarized outlet only
one way. If the plug does not fi t fully in the
outlet, reverse the plug. If it still does not fi t,
contact a qualifi ed electrician to install the
proper outlet. Do not modify the plug in any
way.
Summary of Contents for Lena
Page 1: ...K E E P I N G T H E W O R L D S E W I N G User s Guide ...
Page 30: ......
