Bug Zapper
Model No: HU-001
User manual
1. INTRODUCTION
2. ATTENTION
3. WHERE AND HOW TO USE
4. BULB REPLACEMENT
5. TECHNICAL INORMATION
6. TROUBLESHOOTING
7. GUARANTEE
8. HOW TO ADD DEVICE TO APP
TABLE OF CONTENTS
1.INTRODUCTION
- Thanks for purchasing Our Bug Zapper. please check the condition
of the device before use.
- If the device is damaged, do not use it.
- The device is environmentally safe and hygienic, smoke-free and
non-toxic.
-It does not include pesticides. The built-in lamp is harmless to
people, pets or plants.
- The highly efficient fitting tube emits special ultraviolet waves
and attracts insects, the flying insects are trapped and electrocuted
by the electrically charged metal grids.
-The device is highly efficient and energy-saving. It is designed for
continuous use and is ready to provide you with a long. mosquito-
free pastime for many years.
- For optimal performance, please read this manual carefully
before use.
-Do not use in inflammable and/or explosive locales and alike.
-Do not intend to touch internal high voltage grids because electric
shock danger. Never put metal objects inside the grid during using.
-Hang or place the appliance out of the reach of children.
-Never remove any fixed part of the appliance to make internal
adjustments to avoid electric shock.
-Unplug the appliance before cleaning. Remove insect debris once
a week: just pull out the collection tray of electric bug zapper and
get rid of them.
-Avoid rough shaking that could damage the tube or components.
2.ATTENTION
-The product is Insect Fly Pest Attractant Trap. Bug Zapper for
Outdoor, Indoor, Backyard, Patio, Home.(Waterproof rating:IP4X)
-The product has an energy-saving design and soft lighting, So it
should not be used in high light conditions. Otherwise, it will affect
the destruction of mosquitoes.
-The right methods for using the device are below: for example,
keep the lighting off and use device before sleeping, or keep the
product in the dark place while working.
3.WHERE AND HOW TO USE
-Disconnect the unit from the electric source.
-Open the lamp by twisting the bottom tray in accordance with the
arrows on it.
-Use a screwdriver to remove the screw that holds the plastic gate.
-Now the bulb can be pulled out of its socket.
-Insert the replacement bulb into the socket.
-Mount all parts back
4.BULB REPLACEMENT
To increase the killing rate, please clean mosquitoes stuck in the
grid.
Before cleaning, please keep the power off, Use a screwdriver to
open the plastic grid case. use soft brush to clean Metal grid.
Input voltage: 110V AC, 60Hz
Total Wattage: 20W; Light source: 18W
High voltage metal grid: 4000V
5.TECHNICAL INFORMATION
APP remote control the bug zapper please read the
“8. HOW TO ADD DEVICE TO APP”
Problem
Possible Cause
Correction
A. The light is off and there is
no high voltage on the grid.
1. There is no electricity.
2. The lamp is not installed
correctly.
3. The burnt out bulb.
1.Check fuse of circuit breaker.
check extension cord.
2.check all sockets for proper fit
and alignment.
3.Replace the light bulb.
B. The light is on, but there is
no high voltage on the grid
1.Sorted grids.
2.The Transformer is defective.
1.Examine the grid and clean it
using an air blower.
2.Replacement by manufacturer
is required.
C. Intermittent or continuous
sparking between grid rods
1.The grid is clogged with foreign
material.
1.Clean the grid using an air
blower.
D. The light is on, but no longer
attracts insects
1. The invisible power of blacklight
is reduced due to the age of the
lamp.
1.Replace the bulb. see bulb
replacement section in the user
manual.
6.TROUBLESHOOTING
-we appreciate your feedback and will do our best to guarantee your
satisfaction.
-One-year warranty. Please email us with your order number or
contact us on Amazon. Your inquiries will be taken care of as soon as
possible.
-This warranty does not cover normal wear of product and damage
caused by misoperation of buyers.
7.GUARANTEE
