HUSABERG FE 450 AUS, Repair Manual

Page: 75 / 285

11/WIRING HARNESS, BATTERY
73
14.1
Disconnecting the negative cable of the battery
–
Switch off all power consumers and the engine.
–
Remove the seat. ( p. 59)
300675-10
–
Disconnect negative cable

of the battery.
Info
Pay attention to the contact disks between the cable sockets and battery
terminals.
14.2
Connecting the negative cable of the battery
300675-10
–
Connect negative cable

.
Info
Contact disks

must be mounted between battery terminals

and cable
sockets

with the claws facing up.
100424-10
–
Tighten the screw.
Guideline
Screw, battery terminal M5 3 Nm (2.2 lbf ft)
14.3
Changing the main fuse
Warning
Fire hazard The electrical system can be overloaded by the use of incorrect fuses.
–
Use only fuses with the prescribed amperage. Never by-pass or repair fuses.
Info
The main fuse protects all power consumers of the vehicle. It is located in the housing of the starter relay on the battery cover.
–
Switch off all power consumers and switch off the engine.
–
Remove the seat. ( p. 59)
100426-10
–
Detach connector

.
–
Remove protection covers

.