HUSABERG FE 450 AUS, Repair Manual

Page: 131 / 285

30/ENGINE - WORK ON THE INDIVIDUAL PARTS
129
200191-10
–
Mount the valve keys.
Info
When mounting the valve keys, ensure that they are seated properly; it is
recommended to secure the valve keys to the valves with a small amount of
grease.
–
Place the shims in the valve spring retainer corresponding to their installation posi-
tion.
19.37
Installing the rocker arm
300371-11
–
Position rocker arm

and insert rocker arm shafts

.
Info
Ensure that the threaded hole of the rocker arm shaft is outwardly posi-
tioned.
Align the drill holes

of the rocker arm shafts with the drill holes

of the
cylinder head.
300370-11
–
Mount and tighten the rocker arm shaft screws

.
Guideline
Screw, rocker arm bearing M7x1 15 Nm
(11.1 lbf ft)
–
Mount and tighten plugs

.
Guideline
Plug, rocker arm M14x1.25 20 Nm
(14.8 lbf ft)
19.38
Installing the coolant temperature sensor
300369-10
–
Mount and tighten the coolant temperature sensor

with O-ring.
Guideline
Coolant temperature sensor at cylinder
head M12x1.5 12 Nm (8.9 lbf ft)