HUSABERG FE 450 AUS, Repair Manual

Page: 108 / 285

30/ENGINE DISASSEMBLY
106
18.26
Removing the outer clutch hub
300325-10
–
Bend the lock washer.
–
Counterhold the inner clutch hub with the special tool. Loosen nut

.
Clutch holder (51129003000) ( p. 268)
–
Remove the nut with the lock washer. Dispose of the lock washer.
300326-10
–
Take off inner clutch hub

and washer

.
Info
The washer usually adheres to the inner clutch hub.
–
Take off outer clutch hub

.
300328-10
–
Remove needle bearing

and collar sleeve

.
18.27
Removing the balancer shaft
300327-10
–
Pull balancer shaft

out of the bearing seats and remove it.
18.28
Removing the primary gear
300329-10
–
Mount special tool

on the primary gear.
Extractor (75029021000) ( p. 270)
–
Counteracting with the special tool, take off the primary gear by taking out the
screw.
–
Remove the special tools.