HUSABERG FE 450 AUS, Repair Manual

Page: 104 / 285

30/ENGINE DISASSEMBLY
102
300305-10
–
Pull the camshaft out of the bearing seats. Take the timing chain off of the
camshaft gear. Remove the camshaft.
18.12
Removing the cylinder head
300306-10
–
Remove screw

.
–
Unscrew screws

in a crisscross pattern and remove.
–
Take off the cylinder head.
–
Take off the dowels. Remove the cylinder head gasket.
18.13
Removing the piston
300307-10
–
Push the cylinder upward.
Info
Only push the cylinder far enough upward that the piston pin can be taken
out.
–
Remove the piston pin retainer

.
–
Remove the piston pin.
–
Take off the cylinder and piston.
–
Push the piston upward out of the cylinder.
Info
If no further work is to be performed on the cylinder and piston, then the
piston can remain in the cylinder.
300308-10
–
Take off dowels

and cylinder base gasket

.
18.14
Removing the distance bushing
300374-10
–
Remove the distance bushing

from the countershaft.