WORK
6
3.1
Installing the shock absorber
100374-11
–
Push splash protector
to the side and position the shock absorber. Mount and
tighten screw
.
Guideline
Screw, top shock absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
243™
–
Mount and tighten screw
.
Guideline
Screw, bottom shock
absorber
M12
80 Nm
(59 lbf ft)
Loctite
®
243™
Info
The heim joint for the shock absorber at the swing arm is Teflon coated. It
must not be greased with grease or with other lubricants. Lubricants dis-
solve the Teflon coating, thereby drastically reducing the service life.
–
Remove the motorcycle from the work stand.
3.2
Installing the headlight mask with the headlight
100460-11
–
Connect plug
.
–
Insert bulb socket
into the high beam indicator lamp.
–
Check that the lighting is working properly.
–
Attach headlight holder
at the nose
and position the headlight mask.
100461-10
–
Wrap rubber band
around the fork legs and close it.
The wiring harness and brake line
are routed in front of the headlight mask.
–
Check the headlight adjustment.
3.3
Installing the front wheel
Warning
Danger of accidents
Reduced braking due to oil or grease on the brake discs.
–
Always keep the brake discs free of oil and grease, and clean them with brake cleaner when necessary.
100412-11
–
Clean and grease shaft seal rings
and bearing surface
of the spacing sleeves.
Long-life grease (
–
Insert the spacing sleeves.
