Hurco winmax, Programming Manual, Page: 41 / 254

WinMax Lathe NC Programming
704-0115-307
Overview
1-21
Edit Functions Menu
The Edit menu provides advanced editing functionality to the user.
Figure 1–8. ISNC Edit Functions Menu
When the Edit Functions softkey is selected from the Basic Programming menu, these
softkeys appear:
• Insert/Overstrike Mode Toggle—switches the data entry style between
insert and overwrite. Currently active mode is shown on the status bar of the
window - “INS” indicates Insert and “OVR” indicates Overwrite.
• Copy Selection—copies the selected text to the Windows' clipboard memory.
If the keyboard is available, this action can be achieved by pressing Ctrl + C
combination. Text can be selected by dragging the pointing device (up/down/
right/left) across the editing area of the screen, or by holding down the
keyboard Shift key and using the arrow keys to select text.
• Cut Selection—copies the selected text to the Windows’ clipboard. In
addition, the selected text is deleted from the part program. If the keyboard
is available, Ctrl + X combination will cut the selected text and place it in the
Windows’ clipboard.
• Paste Selection—text previously copied to the Windows' clipboard is
inserted at the current cursor position. If the keyboard is available, this action
can be achieved by pressing Ctrl + V keys.
• Redo—redoes the editing operation(s) previously undone by the Undo
softkey. If the keyboard is available, Ctrl + Y combination will result in the
same action.
You can also use the touchscreen to toggle the Insert/Overstrike
Mode in the Editor status bar.
Or, you can press the Insert console key to toggle between the two
modes.