Section 3
Description and Technical Data
Page 16
Appliance Description
Belt Conveyor System
SGR | SPV
4330053_A7
3.4.2
View of the food distribution belt system
Figure 3
View of the appliance SPV
1
Beginning of the belt
2
Connector with conveyor roller
3
Belt
4
Control
5
Belt system leg
6
Cleaning drawer with scraper
7
Control panel
8
End of the belt
9
Limit switch
10
Drive component with drive station
11
Intermediate part
12
Conveying direction
13
Deflection element
3.4.3
Standard Equipment
The standard design of the conveyor system includes a dirt scraper and a cleaning drawer that are fitted at
the end of the belt underneath the controls.
The dirt scraper is necessary to clean the belt regularly. It is fitted in such a way that the distance between
the belt and dirt scraper is sufficient to remove leftovers and impurities form the belt without damaging it.
Leftovers and impurities wiped off by the scrapper fall down into the cleaning drawer.
3.4.4
Equipment and Optional Accessories
You can install and fit the conveyor system with optional accessories in various ways:
§
Types of installation (SGR and SPV):
The standing alone design of the conveyor system is mounted on stand feet. A combination of wall and
base installation is possible.
A mobile design includes 2 swivel casters per belt system leg. All swivel casters consist of total locks for
safety reason.
§
Plastic shelves in the base (SGR and SPV)
The plastic shelves are designed as storage shelves in the base. The elements are placed on the long
rails in the base of the conveyor system. The shelves are suitable for long-term use, even at maximum
load (up to 10 kg/m) at temperatures between -30°C and +70°C.