Operation
Section 5
Arrangement and Function of the Controls
Page 21
Banquet trolley heated | neutral
91101983_A4
BKW1/14 L-GN | BKW1/20 L-GN | BKW1/36 B-GN | BKW1/14 L-GN+5PK | BKW1/28 B-GN+10PK | BKW1/23 L-GN
5
Operation
CAUTION
Appliance damage
Fully loaded banquet trolleys on very uneven floors and steep slopes can lose
their balance and tip over.
Only move the banquet trolley over even floors.
Never try to catch the banquet trolley with your hands if it tips over due to
carelessness or external circumstances.
CAUTION
Appliance damage
The mains plug of the appliance may not be inserted or pulled out when load-
ed. The appliance must be switched off (marking on the on/off rotary switch
with thermostat faces upward). Only in case of emergency may the plug be
pulled out when loaded.
Always ensure that the appliance is switched off before you insert the mains
plug or pull it out.
The banquet trolley, especially the safety equipment, must be checked for external visible damages and de-
fects whenever it is put into operation. In case of damage, immediately inform the competent bodies and do
not put the banquet trolley into operation.
5.1
Arrangement and Function of the Controls
The controls of the heated banquet trolley are arranged under the door on the panel of the thermal module.
Figure 5
Thermal module with controls
1
Button of the safety temperature limiter (STB)
2
On/off rotary switch with thermostat
3
Control lamp