Section 2
Safety Instructions
Page 10
Safety Instructions for Transport
ISOBOX® Mobil
Basic
91338723_A0
§
Do not brake the appliance by applying the total locks. The total locks are designed to prevent the
appliance from moving of its own accord. Do not park the appliance on sloping floors. Secure the ap-
pliance against rolling away by applying both total locks after parking.
§
When approaching walls and moving round obstacles, always be aware for persons in your path. Risk
of injury.
§
When transporting the appliance, hold the push handles or push bars with your hands. Never let go of
the appliance while moving it.
§
Move no faster than at walking pace when transporting the appliance. Heavily laden appliances are
difficult to brake and steer. If necessary, ask for assistance when transporting the appliance.
§
Never try to catch the appliance with your hands if it tips over due to carelessness or external circum-
stances. Risk of injury.
2.4
Safety Instructions for Transport
The following aspects are to be taken into account when transporting the appliance:
§
When loading, use only hoists and load lifting devices approved for the weight of the appliance to be
lifted.
§
The appliances have to be safely secured when transported off site inside a vehicle such as a truck.
The total locks are not suitable for securing the appliances when they are transported in a vehicle.
§
Only use transport vehicles that are approved to carry the weight of the appliance.
§
Do not put a defective appliance into operation under any circumstances and inform the supplier im-
mediately in such a case.
2.5
Safety Instructions for Cleaning and Care
The following aspects must be taken into account when performing any cleaning and care tasks:
§
ISOBOX® Mobil can be cleaned in an automated cleaning system. The appliance design ensures
that cleaning agents are able to reach and clean the entire surface of the appliance and guarantee a
perfectly hygienic, reproducible end result after cleaning and drying.
§
Cleaning instructions must be strictly observed for reasons of hygiene.
2.6
Safety Instructions Regarding Fault Repair
The following aspects must be taken into account when carrying out any troubleshooting work:
§
The local Accident Prevention Regulations in force must be observed.
§
Observe the valid product safety regulations for the product when handling oils, greases and other
chemical substances.
§
Only authorised specialists may repair any faults or malfunctions.
§
Only use original spare parts to replace defective components.
