Incounter stacking equipment
Operating instructions
14 / 28
3.3.6 Safety devices
The side panel prevents access to tension springs and heating ele-
ments. In its installed state, access to tension springs and electrical
components from the outside must be prevented by structural means.
Access from the outside is only permitted for maintenance purposes.
4
Transport
4.1
Delivery
Delivery is performed by a transport company, whose specialists are
responsible for securing the load during transport.
4.2
In-house transport
The equipment is permanently installed at the place of use in a counter
or similar structure.
When transporting the entire structure, it must be ensured that the
necessary supports within the structure cannot break away or warp.
4.3
Lifting
The equipment does not have any attachment points for eyelets or
similar lifting aids.
5
Assembly
Installing the equipment
CAUTION
Injuries caused by sharp edges
The mounting frame and base of the product, as well as the surface,
may have sharp edges.
−
Wear suitable protective gloves when transporting and installing
the product.
The stacking equipment is permanently installed in a counter with a
suitable substructure for support. The switches are installed separately
in the same counter. The counter must have a lockable inspection
opening that allows access to the mains connection and for cleaning.
Once assembly is complete, the warning labels supplied with the
product must be affixed to the counter in a clearly visible position in
the immediate vicinity of the product.