Sonicaid FM800 Encore Series Instructions for Use
39
6
5B
Monitoring Fetal Parameters
6.1
59B
Preliminary
Ensure that the transducers and transducer belts are clean
and ready for use. In particular, check the transducers for
cracks or signs of damage. See also cleaning instructions
in section 17.
1 Switch on FM800E.
2 Check the printer:
Is there sufficient paper for the monitoring session?
Is the drawer fully pushed in?
3 Check the printer setup (graticule, scale, paper speed etc).
4 Enter patient details, if required.
6.2
60B
Audio signal
An audio signal can be obtained for FHR and Fetal ECG:
For FHR the FM800E gives an audible representation of the Ultrasound signal.
For FECG the FM800E beeps each time it detects a fetal heartbeat.
The volume control and channel select buttons are on the front panel of FM800E. The
channel select button selects the eligible channels in turn.
The eligible channels are those which:
a) can produce an audio signal,
and
b) have a transducer connected.
To select Audio for a channel, press Channel Select until the Audio symbol appears by
that channel. To turn Audio off, press Channel Select until the Audio symbol does not
appear at all.
Channel Select
Audio symbol
Summary of Contents for Sonicaid FM800 Series
Page 1: ......