UltraScan PRO Supplemental Manual for EasyMatch QC Ver. 2.0
6
Figure 2. Reflectance Port
.
Sample Clamp
The UltraScan PRO includes a spring-loaded sample clamp that can be used to hold samples flat and
securely at the reflectance port. The clamp has two buttons, one which raises and lowers the arm, and
one that moves the clamp toward and away from the reflectance port. The white line at the bottom of
the clamp marks the appropriate clamp position for standardization; in this position both the light trap
and white tile may be placed at the reflectance port by simply pulling back the spring-loaded head of
the clamp.
A magnetic white ceramic disk on the face of the clamp provides a consistent white background for
measurements. A non-slip, magnetic black pad is also included that can be used to replace the white
disk for applications that require a non-slip or dark backing. To change to the pad, simply pop out the
white disk and insert the non-slip pad.
Figure 3. Port Clamp
The reflectance port
with the large area
view port plate
installed.
