HunterLab SpectraTrend HT, User Manual

Page: 81 / 109

SpectraTrend HT User’s Guide 3.2
81
To return to the DIAGNOSTICS MENU select the LEFT ARROW . To return to the MAIN MENU
select the RIGHT ARROW and continue reading, press the GO button.
Distance Sensor
To set the distance sensor, press the RIGHT ARROW to initiate. A sample should be available for
measurement.
Figure 105. Distance Sensor Diagnostic
The raw data for measuring the distance between the sample and the bottom of the sensor is
displayed along with the calculated distance in millimeters.
Figure 106. Sensor Count
To continue measuring, press the GO button. To return to the DIAGNOSTICS MENU , press the
LEFT ARROW and to return to the MAIN MENU , press the RIGHT ARROW .
Self Test
The DIAGNOSTICS MENU contains a fourth function named SELF TEST . When this function is
selected, communication tests between the SpectraTrend ’s subsystems are run. If successful,
the versions of the firmware are displayed. Also shown is the value of the checksum of the
instru
ment’s calibration data in hexadecimal. Press the RIGHT ARROW to begin.