SpectraTrend HT User’s Guide 3.2
39
The
CMC/SHADE SORT
parameter applies only if the color index chosen is
dEc
or
SSN
.
Use the
DOWN ARROW
button to move down to the
CMC/SHADE SORT
parameter,
then press the
RIGHT ARROW
button to obtain the
CMC/SHADE SORT
screen.
Figure 32. CMC/Shade Sort Data View
As shown on the button pad map at the bottom of the screen, use the
UP
and
DOWN
ARROW
buttons to scroll up (
+
) and down (
-
) through the numbers for the digit that is
currently highlighted. Press the
RIGHT ARROW
button (
NEXT
) to move to the next
digit in the value and then to move from the
COMMERCIAL FACTOR
to the
l:c
ratio
and then to the
SHADE BLOCKS
. Press the
LEFT ARROW
button (
DONE
) when the
needed values have been entered.
Figure 33. CMC Parameters Entry
Refer
to the
MEASUREMENT VALUES
section for a description of each the CMC index
values and the definition of shade blocks.
Press the
LEFT ARROW
button (
BACK
) twice to return to the
PRODUCT SETUP
screen.
Standard Values
The Standard Values parameter is only relevant when the Standard Type is
PHYSICAL,
NUMERIC
, or
HITCH
. When the
STANDARD VALUES
parameter is highlighted, press the
RIGHT
ARROW
button to move to the
STANDARD VALUES
configuration screen.
Summary of Contents for SpectraTrend HT
