HunterLab SpectraTrend HT, User Manual

Page: 34 / 109

SpectraTrend HT User’s Guide 3.2
34
Figure 20. Product Setup & Average
Views
NOTE: During a RUN the Display is locked to Absolute or Difference Mode.
Spectral Data, Spectral Difference, Spectral Plot, Diff Plot, and Color Plot are
ONLY available when using the READ menu. When using the RUN mode, this
option setting is ignored.
The VIEWS setting allows you to specify the type of data to display on the SpectraTrend HT’s
LCD screen after taking a measurement.
Figure 21. Product Setup & Views
Press the RIGHT ARROW button to obtain the DATA VIEWS screen.
Up to eight different views may be displayed. Use the UP and DOWN ARROW buttons to move
to the view parameter, then toggle between ENABLED (view on) and DISABLED (view off) using
the RIGHT ARROW button. View 1 is always automatically enabled and may not be disabled.
Figure 22. Data View Enabled