HunterLab SpectraTrend HT, User Manual

Page: 11 / 109

SpectraTrend HT User’s Guide 3.2
11
Power Cords (110V and 220v)
Figure 3. Power Cords for the SpectraTrend HT
Communications
Ethernet Communications Cable
Twenty meters of Ethernet cable are provided for communication between the sensor
and the personal computer. An optional digital output for Pass, Warning, and Fail stack
light is available.
System Power I/O Cable
Thirty meters of System Power I/O cable are provided for connection between the metal
support unit and the sensor. Additional lengths of extension cable may be purchased
separately.
EasyMatch® OL-ST
The EasyMatch OL-ST Software is designed to run on a standard personal computer running
Windows. The software allows the user to enter instructions to the sensor using the keyboard
and mouse. The computer monitor then displays all results, prompts, and diagnostics messages.
The EasyMatch OL ST software allows you to perform the following SpectraTrend HT functions:
•
Select product setups,
•
Modify product setup parameters, and
•
Save readings and event information to a file.
The computer monitor shows the product name, the height of the product or the color index, a
trend plot illustrating the differences between samples and a product standard.
Additional Components and Accessories
There are also various optional components/add-ons available for purchase for use with your
SpectraTrend. HunterLab part numbers are provided for each item listed below for your
convenience in ordering.