MiniScan EZ Supplemental Manual for EasyMatch QC
26
•
Place the bag-wrapped instrument into a new carton which includes, at a minimum,
6
inches of packing material
(preferably foam) around the instrument. Styrofoam peanuts
should not be used as packing material for instruments, as they can suspend items weighing
only up to 5 pounds. Observe the information listed on the bottom of most cartons with
regard to burst strength and gross weight limits. Single wall cardboard cartons should not
be used. (A proper packing carton with packing material may be purchased from
HunterLab, if desired.)
•
Insure the shipment.
•
Provide an itemized packing list of all contents of the shipment.
•
Label the carton(s) as follows:
Hunter Associates Laboratory Inc.
Attn: SRO #____________
11491 Sunset Hills Road
Reston, VA 20190
U.S.A.
When You Need Assistance
When you have a problem with an instrument or software or need technical advice concerning a
specific application, you may consult the support website (support.hunterlab.com). There are
numerous articles on applications, operations, instrument accessories, troubleshooting and more. This
is available 24/7. If you don’t find the information that you require, then you can open a support
request on the website. Please include the following information when cooresponding with
HunterLab.
1.
The type of sensor you are using.
2.
The serial number of the instrument (usually found on a tag on the back or bottom of the
sensor, or inside the transmission compartment).
3.
The type of software you use to access the sensor output (EasyMatch QC), the version of
the software (seen after choosing
Help > About
), the operating system, and the brand and
type of computer.
4.
The specific nature of the problem, including the exact error message received or the
number of units the senso
r reads “off” from the standard tiles.
5.
The steps performed prior to the start of the problem.
6.
Steps already performed to reconcile the problem and/or results of any diagnostics.
7.
The type of product being measured.
8.
Operating environmental conditions under which the instrument is normally used, such as
temperature, humidity, dust, fumes, etc.
Summary of Contents for MiniScan EZ
