HunterLab EasyMatch QC, User Manual

Page: 176 / 366

EasyMatch QC User’s Manual Version 2.1
7-8 The Options Menu
Options/Configure Automatic Standard Search
The Configure Automatic Standard Search command in the Options menu allows you to specify how
you would like automatic standard searching to be performed in the current job. This feature is initiated
when you read a sample, at which time the sample is compared to all standards currently saved in the
database. The standard that is closest in color to the sample is recalled into the current job and linked to
the read sample.
Select the parameter for which the sample-standard comparison will be performed. Your choices are
dE, dE CMC, and dE*. Also select the illuminant/observer combination under which the comparison
will be performed and whether you wish to automatically recall the closest standard to the sample or
choose from a list of the closest five standards. Click
OK to accept the parameters.
Note: Also select (check) Automatic Standard Search in the Measurements menu in order to
actually activate the automatic standard searching you configured here.