HunterLab Agera, User Manual

Page: 73 / 91

User’ s Manual for Agera and EasyMatch Essentials v 1.0
73
Figure 127. Read Options> Auto Export Measurements
•
For a direct connection between Agera and data collection computer, set up the Agera as a
CLIENT .
•
Enter the computer IP address here, in this case 169.254.113.144 and the PORT as 11111.
Press
APPLY on the screen to continue.
Figure 128. Read Options Export
▪
Agera is now ready to send data.
Configure the Computer
•
Connection configurations differ depending on data collection software. The data collection
computer will be set up as a Server.
•
Connect as follows:
▪
Set computer as SERVER.
▪
Enter the computer IP address 169.254.113.144.
▪
Put the port number as 11111.