HunterLab Agera, User Manual

Page: 63 / 91

User’ s Manual for Agera and EasyMatch Essentials v 1.0
63
Views: Spectral Plot
This view provides a plot of wavelength vs. spectral measurement parameter.
Figure 104. Spectral Plot View
•
Press CLEAR ALL to remove all the samples to display. Press SELECT ALL to enable display of
all samples. To select an individual sample, click on the respective Sample in the list located
on the right edge of the screen.
•
The Sample List is paginated. Click the left and right arrow buttons below the samples list to
navigate between pages.
•
Press and hold on the left/right page number arrows under the sample list to show a small
dialog box. This dialog allows you to select the number of records per page to display and
the page number to display.
Figure 105. Spectral Plot Options
•
SPECTRAL PLOT OPTIONS : There are three choices for spectral plot options:
▪
K/S – mathematical calculation based on reflectance and determined at each
wavelength for the standard and sample.
▪
REFLECTANCE - Displays the reflectance value at each wavelength.
▪
% STRENGTH – Percentage of the ratio of the K/S of the sample to the K/S of the
standard.
•
Uncheck the OPTIONS : SHOW BACKGROUND , to display the plot with white background
color.