HunterDouglas Vertiglide Applause Honeycomb, Installation And Care Instructions

Page: 10 / 52

10
Front Of
Shade
Mounting
Bracket
Top Rail
Install The Headrail
NOTE: The headrail will not
slide in the mounting brackets
once installed.
Measure and mark the centerpoint on
the mounting surface.
Measure and mark the
headrail’s centerpoint.
Align the headrail to the matching
marks, then install.
Slip the headrail into the
installation brackets so the front of
the bracket slides under the front
groove on the top of the rail.
Gently roll the back of the headrail up and push back to snap into place.
■
■
■
-
-
OUTSIDE MOUNT — RAIL INSTALLATION
Stationary
Rail
Base
Stationary Rail
Bottom Bracket
Front Of Shade
(Left Stack
Illustrated)
The Base
Extends Toward
The Window
Prepare The Vertical Rails
Side Stack (Left And Right) And Split Stack
Install The Stationary Rail Bottom Bracket
NOTE: Do not insert the bracket
completely. Leave at least 1 /
4
" of the
bracket showing below the stationary rail.
Insert the stationary rail bottom bracket into the
bottom of the stationary rail. (For split stack,
insert a bottom bracket into each stationary
rail.) The base of the bottom bracket should
extend toward the window.